These hitch ends caps are CNC machined out of 6061 T6 billet aluminum. We machined them with 8 different intricate designs and one plain cap. They are then polished to a mirror like finish. 

CHECK OUT THE FINISH!!!

These end caps cover the ugly end holes on the sides of your hitch. The hitches they fit typically came on GM trucks, vans, and suvs. It may not fit the newer models, double check with the following directions.  To make sure you have a hitch it will fit the outside tube width on the side of your hitch should be 3.5" Please don't assume any class III hitch is the same, take a measurement and if you have to e-mail us. Look at the picture we have of the back of the end cap so you understand how it fits. They install in a couple of minutes with the included stainless steel set screws. There are two screws per end cap.
 

BEFORE AND AFTER SHOTS

THE BACK

The Styles
There are nine different end cap styles available. They are shown below (Flames, Tribal, Eagle, Plain, 4 x 4, Lines, Skull and Cross Bones, Flaming Skull, and Cross)

Price: $40.00 per pair  + S & H

Custom designs are available for $40.00 extra. We have many designs available, contact us with what you'd like. We may also be able to use your design if you can send it to us in dxf or vector format.